|
8879-SD
|
|
2 active frequencies (512 Hz and 51 kHz) allow accurate tracing of sondes, pipes and inspection cameras |
|
Single 50/60 Hz frequency locates live utilities without the use of a transmitter |
|
|
Backlit digital display for low-light reading |
|
Push button depth accurate up to 15 feet |
|
|
Locate Sondes up to 10 feet in cast iron |
|
Weather proof membrane buttons |
|
|
Made in the U.S.A. |
|
|
|
The 8872-SD cable, pipe, camera and Sonde locator offers two active
frequencies -- 512 Hz, 51 kHz -- ensuring the ability to track any
manufacturer's camera or Sonde system operating on 512 Hz. Rycom
Instruments® Sondes can be used to locate pinches and blocks in
non-pressurized conduits and pipes. Sonde frequencies are matched to
the frequency of the receiver. Sondes at all frequencies will trace
through conduit up to 20 feet in the air or 10 feet in cast iron.
Passive frequencies identify "live" and charged power lines by their
naturally occurring electromagnetic fields. The 8872-SD offers 1
passive frequency - 50/60 cycles - allowing line locating without the
use of a transmitter.
Simple to operate, the ergonomically designed and balanced 8872-SD
receiver pinpoints inspection cameras, and Sondes in nonmetallic
conduits in a peak mode. A large backlit digital display provides both
relative and actual signal strength while a variable tone pitch gives
an audio indication to the signal. The triple antennae configuration
provides push-button depth accurate up to 15 feet and works in a peak,
pin-point peak and null modes when used with a transmitter.
Whether locating water lines, sewer lines, inspection cameras, or
Sondes, this is an economical and dependable locator for companies of
all sizes.
|
|
|
|
8872-SD